answersLogoWhite

0

Four common ignition sources of hazards include open flames, such as matches or lighters; electrical sparks from faulty wiring or equipment; hot surfaces, like engines or heating elements; and static electricity, which can discharge in flammable environments. These ignition sources can trigger fires or explosions in the presence of combustible materials. Proper safety measures, including routine inspections and appropriate storage of flammable substances, are essential to minimize these risks.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Related Questions

What is the five step crm process?

Identify hazards, assess hazards, develop controls and make decisions, implement controls, supervise and evaluate.


How do you program a 2006 altima remote?

to program here you go get in car and lock doors with switch on door put key in and out of ignition 7x or when hazards flash turn ignition on (do not start car) press any button on 1st remote(if hazards flash you are good) if they do unlock/lock with door switch and do next remote (up to 4 can be done) when done turn ignition off open/close door and try them out


Select the list of the six steps of ORM in order?

# Identify the hazards # Assess the risks # Analyze risk control measures # Make control decisions # Implement risk controls # Supervise and review for RIMS answer --- unsure Supervise, Review, and Feedback


How many steps are in the Risk Management Process?

5 steps • Step 1. Identify hazards. • Step 2. Assess hazards to determine risks. • Step 3. Develop controls and make risk decisions. • Step 4. Implement controls. • Step 5. Supervise and evaluate.


Navy ORM is a step process applied using principles at levels?

Navy ORM is a 5 step process, applied using 4 principles, at 3 levels. 5 steps are: Identify hazards , Assess hazards, Make risk decisions , Implement controls , Supervise (and watch for changes).


What is the correct order of the composite risk management?

Step 1 - Identify hazards.Step 2 - Assess hazards to determine risk.Step 3 - Develop controls and make risk decisions.Step 4 - Implement controls.Step 5 - Supervise and evaluate.The first step in the composite risk management process is to identify hazards to the force. The second step is to assess the hazards in order to determine risk, followed by developing controls and making risk decisions, followed by actually implementing those controls that either eliminate hazards completely, or at least minimize risk. The final step is to supervise and evaluate.Correct order for the steps in the Composite Risk Management process would be first find and mitigate all possible risk and evaluate your possible loss .Identify the hazard, Assess hazards to determine the risk, Develop Controls, Implement Controls, Supervise and Evaluate.


What is the correct sequence for the steps in the CRM process?

The steps for the CRM process are listed below: Step 1 - Identify hazards Step 2 - Assess hazards to determine risk. Step 3 - Develop controls and make risk decisions. Step 4 - Implement controls. Step 5 - Supervise and evaluate.


What do 4 possible hazards include when you are doing an investigation in the field?

fire electrical hazards blow ups


How many ignition coils are in a rx8?

There is a total of 4 ignition coils.


How do you assessment hazards in the composite risk management process?

CRM is a five-step process:Step 1: Identify hazards.Step 2: Assess hazards to determine risk.Step 3: Develop controls and make risk decisions.Step 4: Implement controls.Step 5: Supervise and evaluate.Estimate the probability and severity and then determine the risk level using the risk assessment matrix.


How do you assess hazards in the Composite Risk Management CRM process?

CRM is a five-step process:Step 1: Identify hazards.Step 2: Assess hazards to determine risk.Step 3: Develop controls and make risk decisions.Step 4: Implement controls.Step 5: Supervise and evaluate.Estimate the probability and severity and then determine the risk level using the risk assessment matrix.


How many syllables are in Identify?

The word identify has four syllables.