mopar motors have the number stamped on the side of the engine block
yes
Either a 225 Slant 6, 318 or 360 V8
Yes 1-8-4-3-6-5-7-2
no a dodge 318 is internaly balanced and a dodge 360 is externaly balanced the converter, hermonic balancer and the flywheel are not enterchangeable
It will bolt up, but it will not shift. The 1995 is hydraulic controlled. The 1997 is electronically controlled.
318 and 340 are 2.500 360 are 2.800 Hope this helps
the Prospector had either a 318 cu id or a 360 cu id engine.
5.9L is 360 cubic inches 5.2L is 318 cubic inches
depends if its a 5.2 318 or the 5.9 360 but its a dodge itl pull but everyone has their opinion about dodge, i dont see many problems with them at all.
no heads and intake are different form a 360 to a 318
drop a 440 in it using motor plates to hold the engine in for performance, if your car is a 318 a 340 or a 360 will bolt into the 318 motor mounts.
Sure, it can be done.