I just had this done today on an '05 Cavalier. The labor was $130 and the part was $60. Total $210.
I guess it's worth it to keep my sanity through the winter.
Where is the blend door actuator located on a 2005 malibu
The blend door actuator on a 2005 Chevrolet Cavalier is located behind the dashboard, typically on the passenger side. To access it, you'll need to remove the lower dash panel and possibly the glove compartment for better visibility. The actuator is usually mounted to the HVAC housing, controlling the flow of air between the heating and cooling systems. Be sure to disconnect the battery before attempting any repairs to avoid electrical issues.
How do I locate the heater blend door actuator in a Ford f150 pickup
I believe you are looking for blend door actuator???
how to replace a blend door actuator on a 1999 ford ranger
Probably a faulty blend door actuator. Remove the glove box to gain access to the actuator. Replace the actuator with a new one.
locate blend door actuator for 1997 pontiac bonneville se
Take old one out put new one in
To change the blend door actuator in a 2004 Crown Victoria, first disconnect the negative battery terminal for safety. Remove the glove box and the lower dash panel to access the actuator, which is located on the HVAC box behind the dashboard. Disconnect the electrical connector and remove the screws securing the actuator, then replace it with the new unit and reassemble the components in reverse order. Finally, reconnect the battery and test the actuator's functionality.
You need to remove the glove box and then you will see the actuator. The glove box has about 6 hexagon screws which are simple to remove. However reaching the actuator is another story. Good Luck!
The entire dash assembly needs to be removed to gain access to the blend door actuator. Big job, suggest acquiring a shop manual of you plan on doing this job yourself.
I believe it is located behind the glove compartment. Drop out the glove compartment box and you will see the blend door actuator.