not with out some modification
If your car is V-6 2500c.c. DOHC you will find an aluminum housing with two bolts facing the radiator placed in between hoses on the drivers side of you motor. they will be between the motor and the battery just below the battery tray. if you remove the two bolts the housing will separate and expose the thermostat. Note weep hole goes in upwards.
The Spark plug location on the 2001 2.5 liter dohc is under the valve cover.
2.0 liter ( 121 cubic inch ) DOHC - 4 cylinder engine
On a 2003 Duratec DOHC motor, the thermostat is typically located in a housing on the engine near the top, where the upper radiator hose connects to the engine. To access it, you'll generally need to remove the upper radiator hose and the thermostat housing bolts. It's advisable to consult a repair manual for specific details and diagrams related to your vehicle model.
2.2L OHV or a 2.4L DOHC engine..... anyway,,,,, get a repair manual or go to autozone.com click repair info.
just follow the upper radiator hose toward engine and remove the bolts
The crank sensor on the 2.0 DOHC engine is behind the flywheel (flex plate) on the back of the motor. In order to change it you must pull the transmission or motor.
cual es la psicion de la banda del motor
It is an engine rather than motor - Double OverHead Cam
According to the Owners Manual (see "Related Links" below the ads), the engine coolant capacity is 10 quarts.
The 2.4 litre DOHC engine is NOT an interference engine.
The 4th generation Prelude (1992-1996) had three engine variants, the "S" motor (SOHC F22A1), "Si" motor (DOHC H23A1), and "VTEC" motor (DOHC H22A1).