Sounds like there is a leak in the lines. It is likely before the nozzle that does not spray, and just after the one that trickles. Check the lines by having someone activate the washers while you look at the lines under the hood. No guarantee, but you may see where it is leaking. Pay particular attention to any connections. The car being so new, it may still be under warranty if so, take it back to the dealer. If that doesn't work they could also be clogged. If you have ever filled the washer reservoir with water instead of washer fluid this could be it. If you decide this is the case be careful what cleaning products you use. Washer fluid has ammonia in it, which shouldn't be mixed with bleach products.
I live in Canada on the east coast and just replaced a windshield for a 98 Sunfire. The price was $375.00 Canadian plus taxes and that included labour.
How do you change the windshield washer pump on a 2003 Pontiac Grand Am
What happens when you put windshield washer in the coolant in a Grand prix Pontiac
No
specifically the windshield Anything from 1999-2005 should do :-) I had to have mine replaced before I bought it used from the dealership but I lucked out and they paid any windshield older than 1998 and older won't fit
The 1993 Pontiac Transport windshield wiper control module is located on the firewall in the engine compartment. The windshield wiper control module will be on the passenger side of the firewall.
All 1985-1998 Pontiac Grand Ams take 19" replacement windshield wiper blades on both sides front.
the bottle for the fluid is under the hood on the passenger side of the van towards the windshield.
22 and 17
19 inches
there is a metal tab that your wiper motor is supose to catch most likely its bent same thing happened to me i just banged it back in to place
no