plugs are .035, I think points are .016 with a 60 degree dwell and timing is 4 btdc
no
The 1971 Chevrolet Monte Carlo with a 350 engine typically featured a camshaft with a duration of about 204° at .050" lift and a lift of approximately .420". This engine was part of the GM's small-block family and was designed for a balance of performance and drivability. Specific cam specs can vary based on engine options and modifications, so it's always best to check the engine's build or service manual for the exact specifications.
What are the torque specs for a flywheel and pressure plate on a Datsun 240Z
No it's not.
Torque specs for 71-73 Pontiac 400 main cap bolts 100 ft-lbs, rear mains 120 ft-lbs. Rod bolt specs 43 ft-lbs respectively.
Yes it's the same transmission.
Pontiac ohc 6 service questionsI have the same vehicle. I have a 69 Pontiac service manual printed in may 71. You can get one from "The Parts Place" in Elburn IL. they have a web site but I don't remember it. You can go to the library and get a chiltons repair manual for your year car and it will have all the specs in it.
No
71 mph.
cv axels if it does it when you are turning
The torque specs on the valve cover bolts on a 1999 Hyundai accent are 71 to 89 INCH pounds or 8-10 N.m.
Its on the tag on the drivers side door