0
The camshaft specifications for the 454 engine with casting number 10114182 typically include a lift of around 0.490 inches for both intake and exhaust, a duration of approximately 214 degrees at 0.050 inches for intake and 224 degrees for exhaust, and a lobe separation angle of about 112 degrees. This camshaft is designed for good low-end torque and mid-range power, suitable for both street and mild performance applications. Always verify specific applications and requirements as they can vary.
What else can I help you with?
What year is a 454 engine with a casting number 10114182?
1992 Mark V
Can 454 casting 10114182 be used in Chevelle?
Yes, the 454 casting number 10114182 can be used in a Chevelle, as it refers to a 454 cubic inch big block engine. However, compatibility will depend on the specific year and model of the Chevelle, as well as any modifications needed for proper fitment and performance. Additionally, ensure that the necessary components, such as motor mounts and exhaust manifolds, are also compatible with the Chevelle's chassis. Always consult with a professional or refer to specific vehicle guidelines for the best results.
Where is the casting number on 1978 454?
On a 1978 454 engine, the casting number is typically found on the driver's side of the engine block, just above the oil pan rail, near the bellhousing area. It may also be located on the rear of the engine block, near the engine mount. The casting number helps identify the engine's specifications and production details.
What type GM motor has a casting number of 3969854 a 402 or 454?
402 Chevrolet
Where is the camshaft position sensor located on a 98 Chevy truck 454 engine?
It should be part of the distributor.
Can you build a 572 ci from a 454 ci casting?
you can and you can't. i say both because the block is to small but you could take the time to make the block's cylinders bigger by drilling them and making them wider, you would also have to look at the crank shaft room since this is 454 casting
What are the specifications for a 1997 Chevy 454?
The 1997 Chevy 454 is powered by a 454 cubic inch V8 engine, which produces 230 horsepower. It has a 3-speed automatic transmission and weighs approximately half a ton.
Is a big block motor 454 casting 14015445 a 4 bolt main?
It can be either a 2 or 4 bolt
How do you tell if my 454 is a tall deck block or not?
To determine if your 454 engine is a tall deck block, measure the height of the block from the crankshaft centerline to the top of the deck. A standard deck height for a 454 is about 9.8 inches, while a tall deck block measures approximately 10.2 inches. Additionally, you can check the casting numbers on the block; tall deck blocks typically have specific casting numbers that identify them as such.
Edelbrock camshaft 1989 Chevrolet caprice?
yes, almost any will work with less than 232 duration and 454 lift
What is gm part number 3963512?
3963512 is not a part number. That is the block casting number for Big-Block 427 or 454 engines
What viscosity engine oil do you use in a kawasaki 454 ltd?
SAE 10w40 Click the link for full specifications.
