The brand is not important, but look for brake fluid with Dot4 specification. This will mix happily with lower spec Dot3, which you probably have.
brake fluid.10 mm 11 mm , wd40, and a buddy to help ya
B-thrifty Predator - 2012 The Saxo 1-1 was released on: USA: 11 February 2014
Jack Brake was born on 1890-11-11.
use Dextron 11 or 111 transmission fluid. it works well in power streering
facing engine 2000 jeep cherokee the cap at 11 o'clock is that for coolant? like pre stone? the cap at 1 o'clock is that for brake fluid? where is the cap for transmission fluid?
1 cup = 8 fluid ounces... 11*8 = 88 fluid ounces
== == Use ONLY the fluid that is recommended by the car maker. They designed it so you should follow their instructions carefully.
11 fluid ounces = 1 cup and 3 fluid ounces
The main differences between the Tektro A10-11 and E10-11 brake systems are in their design and performance. The A10-11 is a traditional side-pull brake system, while the E10-11 is a direct mount brake system. The E10-11 typically offers better braking power and modulation compared to the A10-11. Additionally, the E10-11 may be lighter and more aerodynamic than the A10-11.
If it is referring to the diameter of the booster diaphragm assembly itself then the 11 would put out more force than a 7 would. There is more area in an 11 than there is a 7 and the greater the force being put out on the diaphragm itself from sub-atmospheric pressure. Basically more force generated out of the 11 over a 7.......Only problems, much larger and could potentially draw too much vacuum from the engine.
11 ml = 0.372 US fluid ounces.
(11 fluid ounces) / (8 fluid ounces per cup) = 1.375 cups