error code p1345 reads as follows:
Manufacturer Ignition System or Misfire.
P1345 = CKP/CMP Correlation. Crank sensor and cam sensor are not lined up. The cam sensor is usually the one that can be adjusted. The procedure depends on the vehicle, need more info.
P1345 = CKP/CMP Correlation. Crank sensor and cam sensor are not lined up. The cam sensor is usually the one that can be adjusted. The procedure depends on the vehicle, need more info.
Trouble code P1345 means: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor)
no sgc signal. cam position sensor
p1345 means camshaft, crankshaft corelation means someone has messed with the distributor and it is not in sync with the crankshaft.
Code P1345 is for the crankshaft or camshaft position sensor.
Code P1345 typically refers to a problem with the Variable Valve Timing (VVT) system in an internal combustion engine. It indicates that there is a malfunction in the VVT sensor or the timing control, which can lead to poor engine performance, reduced fuel efficiency, and increased emissions. If not addressed, it may cause rough idling, stalling, or engine damage over time. It's advisable to diagnose and repair the issue promptly to maintain optimal engine function.
i have faul p1345
it is a camshaft position sensor check vaccume lines also as for some reason this will throw this cone because of rough idle
Trouble code P1345 means: Camshaft To Crankshaft Position Correlation Fault
Trouble code P1345 means: Camshaft To Crankshaft Position Correlation Fault
GM code P1345 on a 1999 Chevrolet Blazer indicates an issue with the Variable Valve Timing (VVT) system, specifically related to the camshaft position sensor or actuator. This code typically suggests a malfunction in the timing of the engine's camshaft, which can affect engine performance and efficiency. It may result from faulty sensors, wiring issues, or problems with the VVT actuator itself. Diagnosing the root cause usually involves inspecting the sensor and actuator components, as well as checking for any wiring or connector issues.