0
the explosions which are caused by the throttle being pushed down and the harder you push down the throttle the bigger the explosion ANSWER for single piston , power stroke force the piston to bdc . but during any other stroke , the inertia of the spinning crankshaft force the piston to tdc n bdc
What else can I help you with?
What causes fuel in the engine oil?
Bad piston rings. Get new engine.
What causes an engine to burn oil?
The typical causes are worn piston rings or valve guides.
In which step of the four-stroke engine cycle does the heat from the combustion reaction causes the pistons to move?
combustion and expansion
What exerted pressure on the piston in newcomen's steam engine cause it to move?
Steam pressure pushes the piston up. Atmospheric Pressure pushes the piston down.
How do you convert thermal energy into motion?
The most usual way to convert thermal energy (i.e., heat) into motion is by means of a steam engine. You boil water, the steam pushes on a piston, and the piston can then move whatever it is that you want to move.
What causes engine blow by?
Blow by is caused when combustion gases get past the piston into the crank case. The cause will be piston, rings, or cylinder wall.
How does a piston moves downward in d suction operation in a 4stroke engine?
The piston is moved by the connecting rod which in turn is moved by the crankshaft. It is only on the power stroke that the piston moves the connecting rod, crankshaft and all the rest of the engine, in all the other strokes the engine, crankshaft and connecting rod move the piston.
What causes low compression in an engine?
It could be a few things. Mostly likely a leaking head gasket, worn out piston, piston rings or cylinder.
Do diesels have vacuum?
Yes, any piston engine draws air in when the piston move downward on the intake stroke, and as a result does create a lower pressure with respect to the atmospheric pressure around the engine.
In a automotive engine the wrist pin connects?
In an automotive engine, the wrist pin connects the piston to the connecting rod. It allows the piston to move up and down while the connecting rod transfers this motion to the crankshaft. This connection is crucial for proper engine operation and performance.
In which step of the four stroke engine cycle does the heat from the combustion reaction cause the pistons to move?
The heat from the combustion reaction causes the pistons to move during the power stroke in the four-stroke engine cycle. This is when the high-pressure gases from the combustion expand, pushing the piston downward.
What causes the caliper piston to move away from the rotor when the brake pedal is released?
Rotor "Out of Round" when rotating "High" spot will cause piston to retract into caliper body
