0
What else can I help you with?
Do the tire rods need to be greased in a 2006 GM Sierra?
You must mean TIE RODS. -If there is a nipple, they must be greased. Many are sealed units and can not be greased.
What car parts start with t?
Thermostat... Transmission (4wd/rwd) Transaxle (fwd) Tire(s) Tie rods
I need to find a tire for a car, but I am not sure of the size I need, how can I find out?
Take your car or old tire to a tire store. The employees there will be able to determine your tire size needs and recommend a good choice for your vehicle.
How can you check for worn tire rods?
I guess you mean TIE rods . -If so, it's the ball at the outer end that wears most. If your car has done over 50,000 then they will almost certainly need to be changed. To check, remove the front wheels, take the rod in your hand and twist it, if it moves very easily, then you need to change it. It will need alignment afterwards.
What you need to change a tire?
To change an actual tire you need a tire machine to get it off the rim and the new one on. -If you mean the change the WHEEL and tire on a car, then you just need a jack and a tire wrench.
How much does it cost to change tie rods on a 1997 Chrysler Sebring LX?
It can cost between $60 and $250 to change the tire rods on this car. It will depends on where the person gets the parts and the labor charges.
Are my current car tires within the recommended car tire ratings?
To find out you would have to check the users manual for your car. It will have the tire guidelines that you need to follow ect. size and air pressure. These are the recommended tire ratings for your car.
How much do Tire Rods on 1991 model range?
What is a "Tire Rod", Do you mean Tie Rod?
How much does it cost to replace VW Tire Rods?
It can cost upwards of 200 dollars to replace VW tire rods as of 2014. The exact cost depends on the parts and the person replacing them.
How To Change Tires?
To change a tire you will need a jack to lift the car, a spare tire, and a tool to remove the bolts of the tire. Use the jack first to lift the car, then remove the tire, replace it with the new one, and tighten the bolts.
How much helium would it take to fill up a car Tire?
The amount of helium needed to fill a car tire depends on the tire's volume, which typically ranges from about 10 to 15 liters. To fill a standard car tire to the recommended pressure of around 30-35 psi, you would need approximately the same volume of helium as the tire's capacity. Therefore, you would need around 10 to 15 liters of helium to adequately fill a typical car tire.
What will be the rpm of a car tire at the speed of 10 kmh?
Car tires come in various sizes. We'd need to know the dimensions of the tire in order to answer this question.
