O2 heater circut malfunction Bank 1 sensor2. " rear oxygen sensor is bad"
It could be that the distributor was not the problem. Need to know what the code is and what engine you have.
Downstream ... This is after the Catalyst Converter.
Yes it will it's the same
no you need the catalytic converter replaced or removed but the o2 has a code of its own which it is P0141 and says the sensor is malfunctioning
Yes.
1997 S10 4 cylinder engine pressure plate to flywheel bolts, 33 ft lbs.1997 S10 V6 engine pressure plate to flywheel bolts, 29 ft lbs.
5 Quarts.
Chain
Passenger side of engine block.
The engine coolant temp (ECT) sensor on that 97 S10 2.2L would be found close to the thermostat.
It is on the passenger side of the engine block, aprox above the starter.
Replace the engine coolant temp sensor.