you buy new emergency brake cables and put them on. you buy new emergency brake cables and put them on.
A stock emergency brake, on a Chevrolet truck, can be released by manually disengaging the emergency brake. This can be accomplished by loosening the tension nut on the brake.
To release a stuck emergency brake on a 2000 Cadillac STS Seville, start by ensuring that the vehicle is in the "Park" position. Then, gently pull on the emergency brake lever while simultaneously pressing the release button. If the brake remains stuck, check the brake cable for any visible damage or obstruction. If necessary, consider consulting a professional mechanic for further assistance.
A stuck parking brake could be caused by several things. The brake cable that operates that brake could be stuck, or the mechanism could be stuck at the wheel. The wheel will need to be removed and the cable and emergency brake arms will have to be checked.
first check your brake fluid it may be low then check the switch at the emergency brake lever it may be stuck
I use to have a 440c. Do you mean the emergency brake is stuck ? Like the brake pads are stuck in the lock position on the brake disk on the driveline. Something must be froze up or the cable is broke or way to loose to work the brake.
My guess is the emergency brake is stuck.
faulty sensor/emergency brake stuck partially on
I'm thinking about what you said, and I release probably you don't have emergency brake on, it could be something broken on the rear brake hardware, So you have to pull your tires off and check the brake springs and check emergency brake cables under the truck,
The e-brake cable(s) could be stuck.
The emergency brake is mechanical not electrical. There is no fuse for the emergency brake. It is most likely that the brake cable leading to the rear brakes is stuck. This is quite common in vehicles with automatic transmissions because the e-brake (parking brake) is not used very often. As a result the cables get rusty and stick. It is also possible that the cable needs to be adjusted.
I had a Problem with mine and it was the Emergency brake line froze up and stuck. had to have it towed and they replaced the the emergency brake cable.