0
What else can I help you with?
Where are the casting numbers Chevy 350 head?
Under the rocker cover.
What is the cc chamber on a Chevy head casting number 14022601?
58cc
How do you tell a Chevy engines size?
A small or big block Chevy have a casting number on the top of the block behind the driver side head. MorTec has Chevy casting numbers listed online.
How can you tell if you have 350 Chevy head?
write down the casting number under the valve cover and compare it to the list of chevy head castings at mortec.com
Where are the casting number on a 350 Chevy cylinder head?
Remove the valve cover and you will see it stamped into the top of the head.
What is a 3973493 Chevy head casting?
1970-71 Chevrolet Small Block 400cid heads.
How can i tell if my Chevy 350 casting?
casting numbers are on the back of the block. there are numbers on the pad by the head on passenger side front that will reveal information too
What year is Chevy casting 460777?
The Chevy casting number 460777 corresponds to a cylinder head that was produced in 1972. These heads were typically used on various Chevy small block engines during that time. To confirm specifics about the application, it's recommended to check additional identifying marks or numbers on the head.
What is a 3998998 Chevy head casting?
I think you may have misread the casting numbers. It should be a 3998993. The 8's and 3's look a lot alike.
How do you find out the casting number on a Chevy 350?
THE BLOCK CASTING NUMBER IS BEHIND THE CYL. HEAD. SORRY CAN'T REMEMBER WHICH HEAD. IT USUALLY IS A RAISED SEVEN DIGIT NUMBER. THE CYL. HEAD CASTING NUMBER REQUIRES REMOVING THE VALVE COVER AND CHECKING THE RAISED CASTING NUMBER ON TOP OF THE HEAD. YOU CAN CALL A DEALER OR A ENGINE REBUILDING SHOP AND GIVE THEM THE NUMBERS. THEY SHOULD BE ABLE TO GIVE YOU THE YEARS THAT CORRESPON TO THE CASTING NUMBERS.
What Chevy engine has the casting number 3970011?
What Chevy engine has the casting number 3970011?
Does a Chevy 5.3 have head gasket problems?
It has Head problems.... if it has a casting number of 706 on the top end of the head, then have the head pressure tested. It cracks in the #1 head bolt hole area.
