0
A star shaped hole is a Torx, Their sizes go, T8-(T10-T15-T20 most common) upto...T50. There are bolts that the head looks like that and they are sized the same but with the designation "E" instead of "T". All tool manufacturers sell them, as they are becoming more popular with newer cars. Lisle makes a nice $/value set.
What else can I help you with?
How do you make a bolt fit into a larger hole?
I would get a larger bolt. I would get a larger bolt. If I wanted to make a bolt fit into a larger hole, I would use a SMALLER bolt than the hole.
What is the bolt tightening sequence for 48 hole flange?
48 hole bolt tightening seqence
What does the black hole do to the star?
A black hole originated as a star, that is, the star converted to a black hole.
Where do do you measure the 2001 accord bolt pattern from hole to hole clockwise or hole to hole diagonally?
to measure the bolt pattern on any given wheel, you measure the two lug holes which are furthest apart. If you had a 5 lug wheel, and the star pattern were standing straight up, you would measure from the center of the top hole, to the center of the bottom right or left hole. For a 2001 Honda Accord the bolt pattern should be 4x114.3 for the 4 lug wheels, and 5x114.3 for the 5 lug V6 models.
What is a hole a called that bolt goes into on a metal part?
A hole that a bolt goes into on a metal part is commonly referred to as a "bolt hole." It is designed to accommodate the bolt's threaded shaft, allowing for secure fastening between two or more components. Proper sizing and alignment of the bolt hole are crucial for ensuring the strength and stability of the assembly.
What is the bolt pattern for a 1996 Honda Accord Coupe Are some 5 hole and some 4 hole?
bolt pattern is: 4X114.3 - four hole.
Did black hole creats another star?
A black hole does not create a star. A black hole is formed when a star dies.
What is a anchor hole called?
An anchor hole is also commonly known as a bolt hole or a fixing hole. It is a hole drilled or created to secure an anchor, bolt, or fastener into a surface for stability or support.
What is the name of the hole in a nut and bolt set?
It's a threaded hole.
What is the hole for in the stock of an mauser 8mm?
Buttstock hole is for bolt disassembly
What is the standard 10 bolt hole size for this particular application?
The standard 10 bolt hole size for this application is 3/16 inch.
What is the standard size of a 3/8 bolt hole?
The standard size of a 3/8 bolt hole is typically 0.40625 inches in diameter.
