0
What else can I help you with?
A compressor that has a piston that travels back and forth in a cylinder is a?
It is simply a piston compressor.
Why are connecting rods used in a car engine?
Con rods are used not ony in car engines, but in just about all piston engines. They're needed to turn the reciprocating(back-forth) motion of the piston into the rotary motion of the crankshaft. That rotation is then - via the gearbox, prop shaft etc what propels the car forward.
What is bump clearance?
It is the space between the top of the piston and the bottom of the cylinder head. Great care should be used when putting an engine back together to make sure the bump clearance is not 0 so that the piston will not hit the head cylinder.
What is function of piston pin of a piston?
The piston pin joins the piston to the connecting rod. Igniting fuel / air mixture pushes down on the top of the piston, the piston transfers the force to the connecting rod, which in turn pushes against the crankshaft, converting the up and down motion of the piston to the rotary motion of the crankshaft. The piston pin allows back and forth motion of the connecting rod (as it's other end is moving back and forth in a circular motion with the crankshaft.)...if instead of a pin a solid joint was made from the piston to the connecting rod the engine would not be able to run, as the connecting rod would try to rock the piston back and forth (side to side, not up and down) as the rod was moved sideways with the crankshaft.
What motion does a piston have rotatory or oscillatory?
A piston typically has an oscillatory motion within a cylinder. It moves back and forth in a linear direction, driven by the combustion process in an engine.
What does the steam move back and forth inside a cylinder?
In a steam engine, steam moves back and forth inside a cylinder due to the expansion and contraction of the steam as it is alternately admitted and then released from the cylinder. This movement drives a piston back and forth, which in turn generates mechanical energy used to power the engine.
How do car engines operate?
car engines work on a simple basis of suck, squeeze bang, blow. this means that in the first stroke of a piston the air fuel mixture is sucked into the cylinder, the valves then close. when the piston travels back up the cylinder it compresses the air fuel mix and then the spark plug ignites this making the explosion and forcing the piston back down the cylinder, this is the bang stage. then finally the piston travels back up the cylinder and blows out all the exhaust gases. this completes the four stroke cycle for the engine.
Differentiate between a reciprocating mortion of a cylinder piston and a rotary motion?
Rotary means going around, like in a Wankel. Reciprocating means going back and forth. like in a ordinary piston engine.
How do you get panties that fak you these would have 1 or 2 dildos inside that would piston back and forth out of you while you were them?
Ask in an adult sex shop for advice on this.
Which mechanical motion creates a back and forth or up and down mechanical motion which could hit or trap you between a moving part and a stationary object?
Reciprocating motion creates a back and forth or up and down mechanical motion that could potentially trap you between a moving part and a stationary object. Examples include piston-driven mechanisms in engines or hydraulic systems. It's important to be cautious around reciprocating machinery to prevent accidents.
What is A piston that move back and forth in a cylinder to move hydraulic fluid?
That is called a hydraulic cylinder. It converts fluid power into mechanical force to move equipment or machinery.
What machines push and pull?
A common example of a machine that pushes and pulls is a hydraulic piston system. This system uses fluid pressure to generate linear motion in both directions, allowing it to push and pull objects. Other examples include engines with pistons or cylinders that move back and forth to create pushing and pulling forces.
