Power train Control Module. It is the engine computer.
The PCM on a 2003 Neon is between the radiator and the transmission under the hood.
Need a 1996-1999 Wiring diagram for PCM for dodge neon
No, the years have to match.
To replace the PCM (Powertrain Control Module) on a 2004 Dodge Neon 2.0, first disconnect the negative battery terminal to ensure safety. Then, locate the PCM, which is typically found near the driver's side of the engine compartment. Remove the mounting bolts and disconnect the wiring harnesses attached to the PCM. Install the new PCM by reconnecting the wiring harnesses and securing it with the bolts, then reconnect the battery terminal and start the vehicle to ensure proper operation.
If the Neon's are both the same year and have the same engine type then the PCM should swap out ok. If the engines are different then the PCM may not work properly.
PCM internal failure.PCM internal failure.
under the hood driver side above wheel well.
You can not. It is a one time program.
A 2004 Dodge Neon uses 5W30. It can be synthetic,, conventional, or a blend.
There's only one way. Put a known good PCM in and see if it works better.
the Pcm is located to the front right of the engine compartment under the washer fill tube and to the right of the battery
YesYes