0
What else can I help you with?
What is valve lash adjustment spec on 1992 Toyota Land Cruiser L6?
valve lash should be set at 30 thou
What are the valve lash specs for a Honda ATC 70?
From the Honda spec book: Intake = .002", Exhaust .002"
What is valve lash spec on 2003 Honda ATV trx250ex model?
the manual say's that both valves are .13mm
What is the valve lash spec for 1987 Suzuki 250 Quad?
The valve lash specification for a 1987 Suzuki 250 Quad is typically set at 0.05 mm (0.002 inches) for both the intake and exhaust valves when the engine is cold. It's important to check and adjust the valve clearance regularly to ensure optimal engine performance and prevent potential damage. Always refer to the owner's manual or service manual for the most accurate specifications and maintenance procedures.
What is the rocker arm lash spec for 3.8 ford motor?
There is no valve adjustment on this engine. You tighten the rocker arms in 2 stages. First stage, 44 in lbs. Second stage, 26 ft lbs. If you have valve clatter, you have worn valve train parts.
Is the 2006 accord the same body as a accord euro but with different styling?
No the accord Euro is the same as the USA spec Acura TSX.
How much torque lbs should the rocker arms be set at?
most rockers do not have a torque spec depends on the engine some have a lash spec which has to be set with a feeler gauge but it is different for every engine
What is the valve clearance on a vl 250 intruder?
intruder lc 250 valve clarance spec place
What does valve timing 0.006 mean on a camshaft spec card?
It is the "Advertised duration", used by the factory. It is the Valve timing from when the valve is .006inches off the valve seat to .006" off the valve seat.
What is the torque spec on the valve cover for a Hyundai accent 1.5?
72in-lbs
What is the torque spec for Chrysler 518 transmission valve body?
100 in lbs
What is the valve spec for 96 Honda foreman 400?
.006 for intake and exhaust
