The 2ZZ-GE engine, used in various Toyota models, has connecting rods that typically feature a length of approximately 140 mm. The torque specifications for the connecting rod bolts are generally around 45 Nm (33 lb-ft) for initial torque, followed by an additional angle torque of 90 degrees. It's essential to refer to the specific service manual for the correct specifications, as they can vary slightly depending on the application. Always use a torque wrench for precise measurements during assembly.
what is the main and connecting rod for a gmc 2.2l
whats the torque odn a 2000 ford windstar 3.8 connecting rod
1.8 mazda etude 1998 con rod torque spec
The connecting rod nuts are 26 ft. pounds for the 3.0.
36 foot pounds
45 ft. LBS.
33 ft-lbs
Ford 2.0L Focus Rod Torque is 16-19 FT/LBS, + 90°
Isuzu 12pd1 cylinder head bolt torque
The connecting rod torque specs, for a 3126 Caterpillar diesel engine, are 70 pounds per square inch. The bolts should be torqued in 30 pound intervals.
65 ft-lbs on cylinder heads and 45 ft-lbs on connecting rods
34 ft-lbs according to haynes manual.