0
What else can I help you with?
What is the operating temperature of a 1997 Chevrolet Cavalier 2.2L?
The 1997 Chevrolet Cavalier 2.2 liter engine operating temperature is 180 degrees. Aftermarket thermostats can allow the operating temperature to rise to 195 degrees.
What is the correct oil pressure?
The correct oil pressure for an engine typically ranges between 25 to 65 psi when the engine is running at operating temperature, although this can vary depending on the vehicle and engine type. It’s important to consult the owner's manual or manufacturer's specifications for the exact pressure requirements for a specific engine. Low oil pressure can indicate potential problems such as low oil levels, worn bearings, or a failing oil pump. Regular monitoring is essential to ensure engine health.
What is 1979 oil pressure in a 350 engine?
The 1979 Chevrolet 350 cubic inch engine oil pressure should be in the 40 to 45 PSI range. The more miles an engine has the lower the oil pressure will be.
Where is the oil pressure sensor located on a 2008 Chevrolet impala?
The oil pressure sensor, on a 2008 Chevrolet Impala, is located on the front of the engine. The sensor will be just above the oil pan.
Chevrolet Vortec 6 liter engine oil pressure sensor?
It's at the top rear of the engine near the distributor.
Why does engine oil pressure becomes high?
The pressure will be high until the oil reaches full operating temperature.
Where is the oil pressure sender in a 1980 Chevrolet Corvette?
at the top rear of the engine, behind distributer
What is the normal oil pressure at idle for a 6.0 liter Chevrolet vortec engine?
Around 40
What is the fuel pressure for a 1998 Chevrolet Blazer 4.3 engine?
60 to 66 psi. key on, engine off, pump running.
Where is the oil pressure sending unit on 2000 Chevrolet Malibu?
On the front of the engine above the oil filter.
Where is the oil pressure switch on a 1998 Chevrolet 350 motor?
be hind the describer on top of the engine distributor
Where is the oil pressure sensor on a 1996 Chevrolet Blazer?
This sensor is at top rear of engine, next to distributor.
