answersLogoWhite

0

What else can I help you with?

Related Questions

What is the correct operating pressures for R134a refrigerant in a 2003 dodge ram truck air conditioner?

The make and model doesn't matter - the correct pressures for an R134a system in one vehicle is the same as the other. What the pressures are supposed to read can vary greatly. There's a little something called the 'pressure/temperature' relationship. In short, the ambient air temperature and humidity level are going to impact what the correct system pressure should be. So, depending on what the ambient air temperature and humidity level is, the correct operating pressure can be anywhere from 28 - 60 psig on the low side, and anywhere from 130 - 350 psig on the high side.


What are normal R22 operating pressures?

The pressures depend on the temperatures so it is not possible to give "normal" temperatures. The pressures change with the outdoor and indoor temperatures. You need to be EPA certified to attach gauges to the unit to check the pressures.


What would happen if there were more refrigerant in the system than the condenser and the receiver could hold?

If there is more refrigerant in the system than the condenser and receiver can hold, it can lead to poor system performance, higher operating pressures, and potential damage to the components. Overcharging the system can result in decreased efficiency, compressor failure, and safety risks due to high pressure levels. It is essential to have the correct amount of refrigerant in the system to ensure optimal performance and prevent damage.


Can you use 134a refrigerant on your Hyundai elantra 2006?

Yes, this is the correct refrigerant.


What is the pressure of R-410 in Psi in AC unit?

The pressure of R-410 refrigerant in an AC unit typically ranges from 130 to 150 psi on the low side and 350 to 450 psi on the high side, depending on factors like outdoor temperature and system conditions. It is important to consult the manufacturer's specifications or a qualified technician to ensure correct operating pressures.


How do you correct when a compressor has lock up due to liquid charging?

Bleed off some of the refrigerant to get the system pressure down, then wait a while until any liquid refrigerant in the compressor has time to leak into the refrigerant loop. It may take a few minutes; since the compressor valves seal imperfectly, pressures will eventually equalize and it should be possible to start up the compressor again.


What type of refrigerant is used on a 1992 infinity g20?

you can buy the right refrigerant over the counter at checker auto or auto zone, the correct refrigerant is 134a


Is the library's building was built correct or the library building was built correct?

The library's building was built is correct.


Is there a gauge available to measure the amount of freon in a home central air unit?

It is not 1 guage, it is a dual guage that measures high and low side pressures that are used in conjuction with the indoor and outdoor temp, unit size, and blower capacity to determine if you have the correct amount of refrigerant in your system.


What is the correct tire pressures for BMW 5 series?

30 dpi


What are the correct tire pressures for a 2004 Honda CR-V?

30


What is the correct charge for a refrigerant 134a refrigerator freezer?

25-40 psi