19 to 21 inches of vacuum at an idle, The higher the better. If the engine has a high performance cam then vacuum will be alot lower.
When you rev the engine up vacuum should drop and then come right back up.
It doesn't have a vacuum line attached to the fuel pressure regulator.
The vacuum lines on a 2000 Chevy Silverado run between the intake manifold and multiple valves across the top of the engine. The vacuum pressure is generated by the engine's compression.
Oil Pressure is not a
Fuel pressure for a 1997 Chevy S10 with a 4.3L engine requires 60 to 66 psi.
41-47psi
35psi
40 to 45 LBS. @ 2000 RPMs
The book I am looking at says the pressure for 1998 and later is44 to50 psi
The correct tire is 215/75R/15 and the correct tire pressure is 35Psi
30 -32 psi
50 to 60 psi
around 6-8 degrees with the vacuum advance blocked off. electronic ignition has no vacuum advance! How does one blank off the electronic advance???