0
The 727 and 904 transmissions are both automatic transmissions produced by Chrysler, but they differ in design and application. The 727 is a heavier-duty transmission, typically used in larger vehicles and capable of handling more torque, making it suitable for trucks and performance applications. In contrast, the 904 is lighter and designed for smaller, more fuel-efficient vehicles, featuring a simpler construction and lower torque capacity. Additionally, the 727 has a more complex fluid path and is often seen in higher-performance or heavy-duty contexts.
What else can I help you with?
Is there a difference between 1969-1972 Dodge transmission cooler lines?
Cooler lines should fit.Check and see if you have a 904 or 727 transmission. It should work fine, Good luck.
What transmission goes with a 318 motor?
A Torqueflite 727 or 904
What transmission is interchangable on a 78 dodge D100 with a 318?
904 TF and 727 TF and many more with a kit.
Does the spline on a mopar 727 904 or 999 make a difference when swapping transmissions on a 1982 dodge d150 can I just pull any tranny from the junkyard and use it if its dodge 727 904 or 999?
A while ago I ordered a transmission to replace the dying (later dead) one in my 1989 B250 van. I ordered the 727 assuming a big rig like that with a 318 would have the beefier transmission. My mistake, we had a van with a 904. The 727 is 4 inches longer than the 904, has a different size torque converter, and a different sized rear spline. a few bits of linkage is different. Now we have to go out and find a shorter drive shaft that properly connects to our new 727 and a new flex plate that fits the 727's torque converter size. We will probably have to modify some linkage as well. So I'd make sure to get the right transmission if you want an easy swap.
What transmission came in the automatic 1989 dodge Dakota?
Many choices here, either a 999, 904 an A 727 or an A 518
What is the name of the automatic transmission in a 1988 Dodge D100?
Should be an A727 tranny. I have an 1989 Dodge D100 3.9 v6 and the transmission in it is an 904 a lighter version of the 727.
What trans will a 79 power wagon?
a 727 auto, a 904 auto
What trans will fit a 79 power wagon?
a 727 auto, a 904 auto
Will a 318 bolt up to a transmission hooked up to a slant 6?
No. The bolt patterns are different. You will need a transmission (904 or 727) from a small block chrysler. Also,the flexplate and or torque convertors are balanced according to the specific engine used.
What is the difference when 409 is subtracted from 904?
When 409 is subtracted from 904, the result is 495. This is calculated by performing the operation 904 - 409. The difference reflects how much larger 904 is compared to 409.
What transmission will fit on a 1989 Dodge 318 automatic?
The 1989 Dodge 318 engine typically uses the Chrysler 904 or 727 automatic transmission. Both of these transmissions are compatible with the 318 engine and can be used as replacements. However, the 727 is a heavier-duty option and may be more suitable if you’re looking for increased durability. Always ensure compatibility with your specific vehicle setup and consider consulting a professional for installation.
What is the name of the small block mopar transmission?
904 torqueflite
