answersLogoWhite

0

wheel bearing is on the alxewhere the tire fits thecv joint is aaxle thatcomeoff the control arm and fits in to the transmission it has a rubber boot that cover it also

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Will a bad wheel bearing or cv joint wear out your tires?

A wheel bearing could.


Can you use any scooter bearing for any scooter wheel?

Yes, there is no difference between the bearing slot in any scooter wheel. Any bearing will fit any wheel.


How do you replace a wheel bearing in a 2004 Toyota Sienna?

Is the wheel bearing on the front or the rear ????.. There is a big difference ...


Will CV joint be damaged if you don't replace both wheel bearings?

An extremely loose wheel bearing can cause the cv joint to be damaged.


What is the weering noise from passenger side wheel gets lowder when i go faster wheel bearing cv joint driveshaft?

bad wheeling bearing


What is the part between the passenger front axle and the wheel bearing on a dodge 2500 diesel?

Axle shaft u joint or the steering knuckle.


Why do the front end tires wear on the outer tread on a 3500 Dodge van 5.2 liter?

Loose or bentsteering or suspension component such as tie rod, wheel bearing,or ball joint. Alignment not in specs.Loose or bentsteering or suspension component such as tie rod, wheel bearing,or ball joint. Alignment not in specs.


Is wheel bearing and hub bearing connected?

They're the same thing. What I mean is that the bearing lies between the axle and the hub, and the wheel is bolted to the hub.


How can you tell the difference between a flat spot on the tire and a bad wheel bearing?

If you suspect a flat spot on a tire examine the tire closely. You should be able to see a flat spot. To determine if your car has a bad wheel bearing rotate the wheel. A bad wheel bearing will often make a grinding sound as well as feeling rough as you turn the wheel. A bad wheel bearing may also shake or wiggle. It will also cause a car shaking problem.


Where do you measure the wheel bearing play?

You can raise the vehicle front or rear and move the wheel back and forth and up and down, so as to feel for play. Excessive play in the wheel indicates loose components, whether a wheel bearing or tie rod or ball joint. If there is excessive play moving the wheel left and right, then could be a tie rod. If there is excessive play up and down, then could be a ball joint. If there is excessive play all around, then could be the wheel bearing.


How do you or can you change the u-joint on the out side front axel of a 1998 dodge 4x4?

first take wheel off, remove brake caliper,brake rotor then 4 bolts behind the front wheel bearing assy. then pull front axle out with wheel bearing attached then change u-joint and reassemble. PS wheel bearing assy can be stubborn so plenty of lubricant is needed to break loose


What is it when your car vibrates while turning the steering wheel?

Losse wheel, worn bearing, or more than likely, a worn CV joint.