I was looking up the same question for one of our Vermeer Saws and their Rep told me that the rule of thumb they use is 1 Gallon for every 20 horse power per hour under Full Load. You would have to decide what your duty cycle is and multiply by that.
Example:
185hp/20hp*33.33 (1/3 duty cycle)=3.08 or 3.1 (rounded)
Hope this helps
what is the hourly fuel consumption for a 963C loader
The hourly fuel consumption of a Komatsu WA600 Wheel Loader typically ranges from 12 to 15 gallons, depending on factors such as load, operating conditions, and the specific model configuration. This loader is designed for heavy-duty tasks, which can impact fuel efficiency. Operators can optimize fuel consumption by ensuring proper maintenance and efficient operation practices. Always refer to the manufacturer's specifications for the most accurate information.
the Hourly fuel consumption of Cat 972 g loader is around 25 liters per hour.
3.5
4 gal
13 gph
A bit over 100L an hour,
1 mile for every 5 litres
A Komatsu 300 will use 5 to 8 gallons of fuel an hour. This number will stay closer to the 8 gallon per hour range is used conservatively.
The hourly fuel consumption of a Komatsu D85-15 bulldozer typically ranges from 8 to 12 gallons per hour, depending on the load, operating conditions, and usage. Factors such as terrain, weather, and the type of work being performed can also influence fuel efficiency. For precise figures, it's always best to refer to the manufacturer's specifications or the machine's operational manual.
This all depends on the type of work, amount of idle, if it is used only for digging and not lifting etc, then it also depends on the density of the material.
my 86 580 super e uses one gallon an hour if im running hard.