Normally from 4 to 4.5 quarts. Park on level surface. Drain the oil and change the filter. Add 4 quarts. Start the engine and run for a minimum of 1 minute. Shut it off and wait 1 hour. Check the oil level and add as necessary. You now know the capacity.
It holds 6 quarts of oil.
5 quarts
That engine hold 6 quarts of oil
Never heard of a v6 in a Wrangler, only inline 4 and inline 6.
The oil capacity for a 2007 Mazda 6 varies depending on the engine type. For the 2.3L inline-4 engine, the capacity is approximately 4.5 quarts (4.3 liters) with a filter change. For the 3.0L V6 engine, the capacity is about 5.5 quarts (5.2 liters) with a filter change. Always refer to the owner's manual for the most accurate specifications.
The engine oil capacity for the 2011 Ford Focus varies slightly depending on the engine type. For the 2.0L inline-4 engine, the capacity is approximately 5 quarts (with a filter change). If equipped with the 2.0L Ti-VCT engine, the capacity is also around 5 quarts. Always refer to the owner's manual for the most accurate specifications.
The 4.0L V6 oil capacity is 6 quarts with filter change. Use only SAE 10w30 any major brand. The 2.5 L inline 4 cylinder uses the exact same weight oil and holds 4 quarts with filter change.
Inline 4 is 1000 lbs and 6 cyl is 1500 lbs.
The engine oil capacity for a 1997 Ford Falcon EL varies depending on the engine type. For the 4.0L inline-six engine, the capacity is approximately 6.5 liters (including the oil filter). Always refer to the owner's manual for the most accurate specifications and recommendations for oil type.
For general power use: oil pan capacity is approx. 27 liters oil filter capacity is 4 to 4.5 liters For construction machinery use: oil pan capacity is approx. 25 liters oil filter capacity is 4 to 4.5 liters
If you're talking engine oil capacity, 4 1/2 Qts with oil filter change.
4 quarts with oil filter