There are two possible causes for this: 1. The pilot light is dirty. You can tell if the flame is a yellow color. If this is the case, it will need to be removed and cleaned. 2. The thermocouple is weak. This is the rod that the flame burns on. It is a safety device to show a pilot flame is on before main gas is allowed to the burners.
The pilot light goes out when the fireplace is turned off because it is no longer needed to keep the flame ignited. The pilot light is a small flame that stays lit constantly to ignite the main burner when the fireplace is turned on. When the fireplace is turned off, there is no need for the pilot light to continue burning, so it goes out.
The pilot light goes out when the gas appliance is turned to the "on" position because the flow of gas is redirected from the pilot light to the main burner, causing the pilot light to extinguish.
If the pilot light goes out when the gas is turned on, it could be due to a dirty or faulty thermocouple, a clogged pilot tube, or a problem with the gas supply. It's important to have a professional inspect and repair the water heater to ensure it is functioning safely and effectively.
Ovens are a great fire risk if the pilot light dies. Immediately turn off the gas if this happens.
Yes, it can be dangerous if the pilot light goes out on a furnace because it can lead to a buildup of gas, which can pose a risk of fire or explosion. It is important to follow safety procedures and relight the pilot light promptly if it goes out.
At pilot light, where pilot light flame goes directly onto thermo coupler.
There is not an alternator indicator light on a Honda Pilot. If the alternator goes out, the battery will not stay charged.
To turn on the pilot light on a gas appliance, locate the pilot light button or knob and turn it to the "pilot" position. Then, press and hold the button while using a long lighter to ignite the pilot light. Keep holding the button for about 30 seconds to allow the pilot light to stay lit. If the pilot light goes out, repeat the process.
If the pilot light goes out on your gas appliance, follow these steps: Turn off the gas supply to the appliance. Wait for the gas to dissipate before attempting to relight the pilot light. Follow the manufacturer's instructions for relighting the pilot light. If you are unsure or uncomfortable, contact a professional technician for assistance.
No. The pilot valve is closed when no flame is sensed by the thermocouple.
If the pilot light goes out on a furnace, the furnace will not be able to ignite and produce heat. To relight the pilot light, you can follow the manufacturer's instructions provided in the furnace manual. Typically, this involves turning off the gas supply, waiting for the gas to dissipate, and then using a long lighter or match to relight the pilot light.
If a pilot encounters a situation where the cockpit's pilot light goes out during a flight, they should follow emergency procedures and attempt to relight the pilot light. If unable to do so, the pilot should communicate with air traffic control, assess the situation, and consider diverting to the nearest suitable airport for a safe landing.