The rear hub nut torque settings on a Renault Clio should be set at 175Nm this is what holds the disc in place.
citroen saxo 1.4. what is the rear brake hub torque setting?
You replace it as part of the rear disc assembly. Remove rear wheel and hub nut cover undo hub nut,then remove the rear caliper and pull the disc off the stub axle.
300Nm. Use new nut!
200Nm
The torque settings for the rear hub nut (in the Haynes manual) is 175Nm or 127lb ft.
clipped to lid in rear underfloor storage compartment
The torque settings for rear hubs on a Citroën Saxo typically range from 50 to 70 Nm (Newton-meters) for the hub nut. It's essential to consult the vehicle's service manual for the specific model year, as variations may exist. Always ensure you use a calibrated torque wrench to achieve accurate settings and avoid over-tightening, which could damage components.
220Nm for Scenic, Grand scenic 280Nm
The rear hub nut size for a Citroën C8 is typically 30mm. However, it's advisable to confirm this with the vehicle's manual or a reliable source, as specifications can vary depending on the model year and specific configuration. Always ensure you use the correct size and type of socket to avoid damaging the nut.
The rear axle nut size for a 2012 Suzuki Hayabusa is 32mm. It's important to ensure you use the correct size socket when working on the rear axle to avoid damaging the nut or the axle itself. Always refer to the service manual for specific torque settings and maintenance guidelines.
If yours has disc brakes, remove the caliper mounting bolts and move the caliper out the way. Remove the hub nut assembly and withdraw the disc. Separate the disc from its carrier and hammer out the studs from the front.