The 2008 Scion tC typically uses 5W-20 viscosity grade engine oil, which is suitable for most driving conditions. It's important to choose oil that meets API (American Petroleum Institute) standards, such as API SN or higher. Always check the owner’s manual for specific recommendations and any variations based on driving conditions.
open the hood and look at the oil cap, and it says right there what kind of oil it uses
open the hood and look at the oil cap, and it says right there what kind of oil it uses
4 qts. with oil filter replacement. (always check level after filling and starting engine.)
The 2008 Scion xB typically requires 5W-20 engine oil. It's important to use oil that meets the API (American Petroleum Institute) certification standards. Always check the owner's manual for specific recommendations and oil change intervals to ensure optimal engine performance.
The 2008 Scion XB typically uses 5W-20 viscosity engine oil. It's important to choose an oil that meets the API (American Petroleum Institute) certification for optimal performance. Always check the owner's manual for specific recommendations and any updates on oil specifications.
5w20
change the oil
For a 2008 Scion xB, it is recommended to use 5W-20 or 0W-20 viscosity grade motor oil that meets API (American Petroleum Institute) standards. Synthetic oil can also be a good choice for better performance and protection. Always check the owner’s manual for specific recommendations and specifications.
The 2008 Scion tC typically requires about 4.5 quarts (4.3 liters) of motor oil when equipped with a 2.4L engine, including the oil filter change. It's important to use the recommended oil type, which is usually SAE 5W-20 or 0W-20. Always check the owner’s manual for the most accurate specifications for your vehicle.
4 quarts
It is on the lower right side of the engine compartment. It is easier access (and remove) if you pull off the right front tire first.
Synthetic oil from what I hear...It helps the engine and lasts longer....