0
What else can I help you with?
Ask us anythingJoel has noticed that his engine is not compressing properly during the compression and ignition step. What problem will this pose?
The engine will run inefficiently.
What is the problem if the combustion chamber is not properly sealed?
that would be a compression problem.
Why is my caliper not compressing properly?
Your caliper may not be compressing properly due to air in the brake lines, worn out brake pads, a malfunctioning caliper piston, or a problem with the brake fluid. It is important to diagnose and fix the issue promptly to ensure safe braking performance.
Your 95 eclipse has fire and fuel but wont start. what could be the problem?
Compression, the rings sealing properly? get a compression tester and follow the instructions.
You have 1998 ford mustang that will not start but is firing and has fuel pressure?
An internal combustion engine needs 3 things to run; if it has all three it HAS to run. 1. compression. If the cylinders are building compression properly, and the valves are properly timed, that requirement is satisfied. 2. ignition. If the spark is adequate and timed properly, that requirement is satisfied. 3. fuel. If the carburetor or injectors (whichever your engine has) is delivering fuel properly, that requirement is satisfied. If the engine isn't running you need to find out which requirement isn't being satisfied. The easiest to test would be fuel. Try using starting fluid to see if the engine will briefly run. If it does, you probably have a problem with fuel delivery. If THAT'S not the problem, check the compression. The compression should be even across all cylinders and somewhere around 90-is psi, but you should check with Ford to find out the expected pressure... I'm only guessing. If the compression is up, and the starting fluid didn't get the engine running briefly, the ignition may not be timed properly, check THAT with a timing light. If it's a problem with the ignition, the computer may have "thrown a code", and you can probably find out a lot of what's wrong by just running a computer diagnostic.
Why is my brake caliper not compressing properly?
Your brake caliper may not be compressing properly due to issues such as air in the brake lines, worn brake pads, a malfunctioning brake caliper piston, or a problem with the brake fluid. It is important to have a professional mechanic inspect and diagnose the issue to ensure safe braking performance.
What it could be when your back pain goes to your legs?
I have that. My problem is compression of the Lumbar vertebrae (L-4 and L-5 )compressing the nerves. It is called Spinal Stenosis. Google it and see if it fits
Joel's engine is unable to power his car the way it used to. The spark plug is working and the engine is compressing properly so what could be the problem?
Could be a fuel delivery problem such as a dirty fuel filter.
1996 Toyota Tacoma won't start when hot?
After extensive diagnosis of fuel and ignition system, I solved my 1996 Tacoma hot start problem by having the valve clearances set properly. Tight valves cause compression loss and hard starting when the engine is hot.
Why Joel's engine is unable to power his car the way it used to. The spark plug is working and the engine is compressing properly so what could be the problem?
Could be a fuel delivery problem such as a dirty fuel filter.
Why would a VW would be shaking and idling rough?
Run a compression check and make sure the compression is even across all cylinders. If that's ok, probably a simple tune-up will solve your problem. Most of the time, this is ignition timing.
What are the three types of stress in plates?
The three types of stress in plates are tensile stress (stretching), compressive stress (compressing), and shear stress (sliding or tearing). These stresses can cause deformation or failure in the material if they exceed its strength.
