Refrigerant contaminated with air won't function properly.
If you are referring to automotive refrigerant, the answer is no. Neither refrigerant will work properly if mixed and might damage the compressor or other components.
This is most definitely not a DIY task. To do it properly, you need to first test the purity of the refrigerant, which takes special equipment to do, as does actual recovery and storage of the refrigerant.
To properly add refrigerant to an AC system, you need to first locate the low-pressure port on the system. Then, attach a refrigerant gauge and hose to the port. Start the AC system and slowly add refrigerant until the pressure reaches the recommended level. Be careful not to overfill the system.
No, you cannot recharge a window air conditioner with refrigerant yourself. It requires a professional technician to properly recharge the refrigerant in an air conditioner.
To properly add refrigerant to an AC unit, you need to first locate the service valves on the unit. Then, connect a refrigerant charging hose to the low-pressure service valve. Open the valve on the refrigerant canister and slowly add the refrigerant to the system while monitoring the pressure levels. Be sure to follow the manufacturer's guidelines and do not overfill the system.
The 1996 Dodge Viper uses R-134a refrigerant for its air conditioning system. If you're servicing the A/C system, it's important to ensure that the system is properly evacuated and that the correct amount of refrigerant is used for optimal performance. Always follow manufacturer guidelines when performing maintenance.
condensable gases condensable gases
No, you cannot recharge a window AC unit with refrigerant yourself. It requires a professional HVAC technician to safely and properly recharge the refrigerant in an AC unit.
Evacuate A/C system and properly dispose of old refrigerant. Replace part. Perform a complete A/C system service (SAFELY & PROPERLY). (Personell certified to handle refrigerant may need to install correct type and amount of compressor oil and refrigerant)
To properly refill refrigerant in an air conditioning unit, you should first turn off the unit and locate the service valves. Connect a refrigerant gauge to the low-pressure service valve and slowly add refrigerant until the pressure reaches the recommended level. Be careful not to overfill the unit, as this can cause damage. It is recommended to consult a professional for this task to ensure it is done correctly and safely.
You need a refrigerant recovery system and gauges to do it properly.