The front brake calipers on a 2002 Mustang typically use a T40 Torx bolt. It's important to ensure you have the correct size, as using the wrong tool can strip the bolts. Always check your vehicle's service manual for specific details and torque specifications.
To replace front brake pads on a 2002 Ford Mustang safely raise and stabilize the vehicle. Remove the wheels and caliper. Slide out the front brake pads and replace with new units.
The easiest way is with a "C" clamp.
no. on the front brake calipers the pistons have to be pushed back into the calipers to make room for the new brake pads. on the rear brake calipers the pistons have to be SCREWED back into the calipers. there are notches on the inner edge of the piston rim. you can engage the notches with large needle nose pliers or a large flat washer. turn the piston clockwise as you face it to get it to go in.
sounds like air is still in the system try bleeding system again
The 2002 Ford Mustang has 42.6 in. of front leg room.
The 2002 Ford Mustang has 38.1 in. of front head room.
The 2002 Ford Mustang has 52.3 in. of front hip room.
The 2002 Ford Mustang has 53.6 in. of front shoulder room.
The front track of the 2002 Ford Mustang is 5 ft. 0.2 in. (60.2 in.).
brake light switch is above the brake pedal
there are two bolts that hold brake calipers to a u shaped bracket, remove them and then remove the two bolts holding the u shaped bracket. The rotors will come off at this point.
Brake? On calipers & behind backing plates on drums.