0
What size jet should I use in a 12000BTU LP gas burner if I change it over to burn Natural gas?
The surest way to get the right jet size is to ask the original manufacturer of the burner. Not all propane burners are suitable for changing to natural gas, although almost all natural gas burners are suitable for burning propane with a change of jet. The reason that some burners will not burn natural gas is that the flame speed is too low, and flame instability and lift-off can occur. If you cannot get a direct replacement size from the manufacturer, you can start by using a jet which is about 210% larger. As an example, a gas burner using a number 110 Amal jet on propane at 14" water gauge (37 mbar) will probably be OK with a No. 240 Amal jet on methane (natural gas) at 8" water gauge (20mbar). Similarly, a 75 jet on propane equates to a 160 jet on natural gas. After conversion, the air regulator may need to be adjusted to get the flame to stabilise, and the output on natural gas will be much greater than on propane.
What else can I help you with?
What is the typical burner pressure for natural gas?
This is the pressure supplied from the gas meter to a appliance this should be 20mb at the inlet of the gas valve before the appliance is working ie taking gas from the main pipe.
WHY should you not relight the Bunsen burner?
You have to relight the Bunsen Burner every time you use it.
What colour should the flame be on the Bunsen burner when you are not using it?
The flame on a Bunsen burner should be blue when not in use. If the flame is yellow, it may indicate a problem with the burner, such as not enough air mixing with the gas, which can be a safety hazard.
What should you nickname your Cyndaquil?
bunsun (burner) :P
Function of screw lock in Bunsen burner?
The screw lock in a Bunsen burner is used to control the airflow entering the burner. By adjusting the screw lock, you can regulate the amount of oxygen mixing with the gas, which in turn controls the size and type of flame produced by the burner.
'when should the Bunsen burner flame be used'?
This is not a very well worded question. What do you mean by why should it be used? I Bunsen burner is used for heating things, usually in a lab setting.
What should I do if the burner is not working on my gas stove?
If the burner on your gas stove is not working, first check to make sure the gas supply is turned on. If the gas supply is on and the burner still isn't working, try cleaning the burner and its components. If the issue persists, it may be a problem with the igniter or gas line, and you should contact a professional for repair.
How do you get pou skinny?
YoU Should buy and use the fat burner
What can the very hot flame of a Bunsen burner burn?
The very hot flame of a Bunsen burner can burn a variety of materials, including natural gas, propane, and other flammable gases. It can also be used to vaporize and burn liquids or solids, making it a versatile tool in laboratory settings for heating, sterilizing, and performing chemical reactions. Care should be taken to ensure safety when working with a Bunsen burner.
What does smoke from a burner during the self clean cycle on a GE oven mean?
It most likely means that there was some food residue on the burner. The smoke from the burner itself should stop fairly quickly.
Approximately what should you pay for a good DVD Burner?
the dvd burner this t ime are cheaper than 4 years ago they range from 50$ to 160$ a good dvd burner cost around 100$
Can a DVD burner burn DVD-r but not DVD-rw?
A normal DVD burner should can burn both DVD-r and DVD-rw.
