0
What else can I help you with?
What is the bolt size of the wheels of Fiat Punto?
The heads take a 19mm socket
What size bolt is used to fasten the front bumper cover to the fenders on a 1998 ford escort Se?
It take a 14mm head size for the socket or wrench. Not sure about the shaft size.
Socket wrench size for oil drain bolt?
Oil drain bolts on most vehicles vary from 7/16 to 5/8. Take a crescent wrench under with you to check, then compare the size to a regular socket and use it.
How do you change a serpentine belt on a 2000 Dodge Ram 2500 pick up?
Take a breaker bar and a socket make sure it's the right size socket for the bolt on the tensioner, insert the socket on the bolt and take the tension off the belt and remove make sure you remember the routing so you can replace as you put it back on pull on the tensioner so you can slip the belt back on then when you have it in let the tensioner go and take the socket out and you should have just changed you belt.
What size lug nuts does the 2004 dodge ram 1500 take?
Thread size is 9/16-18. Need a 7/8 socket for removing the lug nuts. Bolt pattern is 5 on 5.5"
How do you change brakes on 2006 Ford Escape?
what can the socket use to take the bolt for breks pad
What size socket do you need to take out spark plugs for a 1989 suzuki katana 600?
18m thinwalled socket
What tool do you use to take out battery?
The correct size socket and ratchet to remove the hold down. And the correct size socket to remove the battery cable clamp.
What size are the transmission pan bolts in a 2001 neon?
Take a socket set and test each socket until you find the correct size that fits snugly.
What size is the centre bolt for the 1996 Mercury Villager?
If you are talking about the center bolt for the front drive axle it is commonly a 36 or 32 mm socket. You can get a set of 36,34,32,30mm from a parts store on a lending program. It will take a large impact gun or breaker bar to braek loose.
What size wrench would you use for a 58 diameter bolt?
I hope you mean a 5/8 bolt (58 inches would take a machine to turn). Measure your bolt head across the opposing flats. For a 5/8 bolt it may be 1 inch or even larger. The last one I did was in a truck's shock mounting and that took a 1.25 inch socket.
How do you get a rounded off bolt loose from the drivers side bracket on a 350 sbc?
If you are still trying to take out the rounded bolt, and can access it pretty easily, try buying an extractor set at your local auto supply store or if you have a Harbor Freight store near you. Make sure you chose theextractor size that will best fit the center of your bolt head. Once you've figured what size you will be using, buy a drill bit ( for metal) the size of the extractor. Start by drilling the center of the bolt head, then with the extractor (which turns in the direction that the bolt loosens), turn out your bolt. Make sure you use a standard size socket on the extractor and not a deep socket. The deep socket has a tendency to slip and damage the extractor head. If you cannot access the bolt head easily, you can purchase specialty wrenches at just about any auto part supplier or sears (craftsman) that would do the job. Or go online and order a ratcheting chain from Mechanic tool supply inc. Hope the info was helpful. 73Lux
