at what temperature does motorcycle oil suppose to get hot
Oil expands about 0.07% for each degree Celsius increase in temperature. This expansion can lead to changes in volume, pressure, and viscosity in the oil.
An oil temperature sensor monitors the oil in a vehicle to ensure that it remains at the right temperature. It is important that the oil is not allowed to get too hot.
I think "crawling oil" is oil in a pan that "crawls" away from the hot center of the pan when it gets really hot.
Room temperature water is likely to have the lowest viscosity among the options provided. Water has a lower viscosity compared to oil, especially when the temperature is below room temperature. Oil typically has a higher viscosity compared to water.
Hot water gets hotter at any temperature that is higher than its temperature.
zaatar is mixed very well with olive oil- room temperature. Never hot oil
yes, temperature does effect plastic if it gets to hot it can melt it.
The density of fuel oil decreases as temperature increases. This is because as temperature rises, the molecules in the fuel oil spread further apart, resulting in a decrease in density. Conversely, as temperature decreases, the molecules come closer together, leading to an increase in density.
when you oil gets hot it tends to thin out. Say your using 5w-30 and when the engine gets warm it knocks it means either the oil is to thin or oil is not getting to that component. next oil chenge try using the lucas oil stablizer and see what it does. It should solve the problem but remember lucas oil oil stablizer takes the place of one quart of oil.
it gets hot and cold
The oil gets thinner. It is normal for the oil pressure to drop after the engine has reached full operating temperature. If you have from 30-40 psi pressure when the engine is hot then that is normal.
yes when gets to hot or is put to close to fire