0
"Engine coolant temperature to cold for closed loop operation."
What it really means:The computer is unhappy as the engine coolant sensor is reading below a set temperature, usually between 150 degrees F and 180 F.If you have a 180 Thermostat try putting the correct 195 F (90C) in and trying it.
Other causes:Thermostat is stuck or damaged not making the engine run at correct temp.Temperature sensor is faulty and returning a incorrect reading.
The engine has an air lock or bubble in the cooling system so the sensor reads too cold.
The engine has a leaking head gasket or cracked head causing the same symptom as an air lock.
What else can I help you with?
How do you get an Mitsubishi Eclipse in San Adrea's?
Well I thought the San Andreas was a fault. The san Andeas fault stretches almost from the top of California to the bottom
What does the flashing of the leds on a PLC controller mean?
The item for which the LED indicates is in a fault condition. Since there exist many brands of PLCs, there are many conditions indicated such as BUS FAULT, SYSTEM FAULT, I/O FAULT, COMMUNICATION FAULT, and many others.
What does remedied mean?
The act or process of correcting a fault or deficiency. For the source and more detailed information concerning this subject, click on the related links section (Answers.com) indicated below this answer box.The act or process of correcting a fault or deficiency. For the source and more detailed information concerning this subject, click on the related links section (Answers.com) indicated below this answer box.The act or process of correcting a fault or deficiency. For the source and more detailed information concerning this subject, click on the related links section (Answers.com) indicated below this answer box.The act or process of correcting a fault or deficiency. For the source and more detailed information concerning this subject, click on the related links section (Answers.com) indicated below this answer box.The act or process of correcting a fault or deficiency. For the source and more detailed information concerning this subject, click on the related links section (Answers.com) indicated below this answer box.The act or process of correcting a fault or deficiency. For the source and more detailed information concerning this subject, click on the related links section (Answers.com) indicated below this answer box.
Mitsubishi outlander front suspension noise?
there is a fault with the suspension Mitsubishi either don't know what it is or don't want to let the public know what it is but i can say that it will eventually wear out your tyres keep at Mitsubishi to rectify the problem and if they dont report the defect to the aust tpt safety bureau.
Why don't the cooling fans turn off on your 2000 Mitsubishi eclipse?
The most common fault are that the fuse has blown or the thermostat is faulty.
Mitsubishi space star 1.8 gdi cuts over 60mph goes into l limp mode engine light on or driven hard fault code p1221 plus traction fault?
P1221` throttle position sensor
What does the SRS light mean in a Mitsubishi montero sport 2001?
SRS stands for Supplemental Restraint System or the Air Bag system. When this light is on the computer for the air bag system has found a fault in the system. When this light is on, the Air bag system is disabled and will not operate in the event of a crash. The light will not turn off until the problem has been fixed and the light needs to be turned off, (code cleared), by using a scan tool at a repair shop.
You got obd2 code p1780 on MY Daewoo Leganza 1999 What is that?
The code p1780 indicated a fault in the park/neutral position switch. It has either failed or is out of adjustment.
89 tracker engine light flashing 23 with ign on and when running what is this code?
Code 23 is a fault in the ATS (Air Temperature Sensor) circuit. (High Temperature indicated)
The coolant starts to boil shortly after starting the engine. State the fault indicated and how you would diagnose the fault?
Coolant not being circulated through the radiator/radiator fan subsystem. Most probably the thermostat is malfunctioning. Two ways to test this fault: (1) Coolant accumulates in coolant reservoir. (2) Remove the thermostat and immerse in boiling water; if thermostat does not open, replace unit.
On a non starting but cranking 1995 Mitsubishi mirage how would you determine if the distributor or ecm is at fault coilignition modulecam sensor is built into the distributor. no spark at all?
this is a common problem on these cars.....the distributor is likely the problem.
What does 78 aps main fault code mean for a Mitsubishi shogun pinin?
The 78 APS (Accelerator Position Sensor) fault code in a Mitsubishi Shogun Pinin indicates a problem with the accelerator pedal position sensor, which monitors the accelerator's position and relays this information to the engine control unit (ECU). This code may trigger issues like poor engine performance, increased emissions, or problems with acceleration. It is advisable to inspect the sensor, its wiring, and connections, and possibly replace the sensor if it's faulty to resolve the issue.
