Usually the jack and tire changing equipment are located under the passenger side rear seat.
Since the Z4 has run flat tires, it does not come with a jack; however, changing the tire is the same as on any car. Using your own jack, jack under the jack pads on the front and rear of the side rocker panels.
passenger side rear panel there is a removable plate the jack and tire changing tools should be located inside there if not they have been removed
On most years of the 1500 dodge ram, the jack is placed under the rear axle near the wheel. Make sure to not pinch any wiring or brake lines with the jack.
When changing a tire on a Buick Rendezvous, you should place the jack under the designated jacking points, which are typically located near the rear and front wheels. For the front tires, the jacking point is just behind the front wheels, while for the rear tires, it's just in front of the rear wheels. Always ensure the vehicle is on a flat surface and that the parking brake is engaged before using the jack.
To change a front tire, place the jack directly behind the tire. To change a back tire, place the jack directly in front of it. Try to get the jack under the tire axis.
A bike tire jack is a tool used to lift the bike off the ground, making it easier to remove and replace the tire. It helps in changing a bike tire by providing leverage and support, allowing for easier access to the tire and wheel.
try the frame
The jack and lug wrench are located underneath the rear passenger side seat. There is a loop in the middle of the seat that you will need to pull and the seat will fold forward. The spare tire is located underneath the rear of the vehicle.
the jack is located behind a panel on the right rear side behind rear seat
under the rear passenger seats
Under the passenger side rear seat.