PAG oil goes in the air conditioner compressor. It is added in the same place as the refrigerant. However, this oil must be added before the lines for adding the refrigerant are put in place.
thers a panel in the front underneth that says oil filter hatch 99'blazer lt 4wd
can I put a 99 Chevy 4l60e transmission in my 86 k5 chevy blazer
No you can not. It is all different from late 99 and up.
what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer
The oil drain plug will be located on the bottom of the oil pan. The oil pan is on the very bottom of the engine. It will be the lowest part of the engine.
if its a 4.3 its either in the bottom at the rear on the drivers side or driver side fender topside
Drop the tank, take it off. and put a new one on!
To add oil to a new AC compressor in a 1999 Chevrolet Blazer, locate the oil fill port on the compressor, which is typically a small plug or fitting. Use the manufacturer's recommended type and amount of refrigerant oil, usually specified in the compressor's manual. It's essential to add the oil before installing the compressor to ensure proper lubrication. After filling, reassemble everything and recharge the AC system with refrigerant according to specifications.
Cracked head or blown head gasket.
Look up under the front bumber and you will see a black plastic cover that is like a small door, open it up and you will see the oil filter.
YES it does.
i have a 4cylndr 99 old alero gx and it requires 5w30