To add hydraulic fluid to a Massey Ferguson 265, locate the hydraulic system fill cap, which is typically found on the top of the transmission case. Remove the cap and pour in the appropriate hydraulic fluid, ensuring you use the correct type specified in the owner's manual. After filling, check the fluid level using the dipstick or sight glass to ensure it is within the recommended range. Always replace the cap securely after filling.
Looks like '79 / '80.
The Massey Ferguson model 265 tractor with serial number 1867505 was produced in 1983. The serial number can help pinpoint the production year, as the 265 series was manufactured primarily during the late 1970s and early 1980s. For precise identification, it's always a good idea to consult official Massey Ferguson resources or documentation.
Looks like '79 / '80.
The serial number for a Massey Ferguson 265 tractor can typically be found in two main locations: on the left side of the engine block, near the oil filter, and on the rear of the tractor, on the left side of the transmission housing. Additionally, the serial number may also be located on a metal plate attached to the frame or under the seat. Always check the owner’s manual for specific details related to your model.
To bleed the fuel line on a Massey Ferguson 265 tractor, first ensure the tractor is off and the fuel supply is turned off. Locate the bleed screw, typically found on the fuel filter or injector pump, and loosen it slightly. Then, turn on the fuel supply, allowing fuel to flow until it runs clear without air bubbles, and tighten the screw. Finally, start the tractor to ensure it runs smoothly.
To the left of the steering column, below the instrument panel.
265 = 265/1
60% of 265= 60% * 265= 0.6 * 265= 159
40% of 265= 40% * 265= 0.4 * 265= 106
30% of 265 = 30% * 265 = 0.3 * 265 = 79.5
.80 * 265 = 21280% of 265 = 212
265-225 = 40