This is located right under the throttle body. There should be 2 hoses coming out from it. The top hose connects to the intake manifold, and the botton hose connects to the air intake.
The 2003 Subaru Outback PCV valve is located on the air cleaner housing. The PCV valve will be on the back of the housing.
where is the pvc valve on a 1998 suaru forester?
On the passenger side of the motor, behind the intake runners.
it is screwed in to the intake maifold on the air box side of the engine
http://www.scoobymods.com/forums/attachment.php?s=1696cc8ef64542d20b5e8dc1ba187e85&attachmentid=162
The PCV (Positive Crankcase Ventilation) valve on a 2006 Subaru WRX STI is located on the driver’s side of the engine, near the rear of the valve cover. It is typically mounted in a grommet on the valve cover and connected to the intake system via a hose. To access it, you may need to remove some engine covers or components for better visibility.
Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.
In a 2005 Subaru Outback, the PCV (Positive Crankcase Ventilation) valve is located on the engine's valve cover. Specifically, it can be found on the driver's side, near the back of the engine. To access it, you may need to remove some engine covers or components, depending on the specific engine type. Always consult the vehicle's service manual for detailed instructions.
On a 2014 Subaru, the Positive Crankcase Ventilation (PCV) valve is typically located on the engine's valve cover. Specifically, it can be found on the driver's side, near the rear of the engine. To access it, you may need to remove some components or covers, as it can be somewhat tucked away. Always consult the vehicle's service manual for precise instructions and diagrams.
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
The PCV valve has a check ball in it, That's what you are hearing. REPLACE PCV VALVE