Bank 1 (one) is the side in front of car (Bank 2 is rear, firewall side) 02 sensor 1 is upstream, on exhaust manifold (02 sensor 2 is downstream, by cat. conv.)
The oxygen sensor bank 1 is located in the exhaust manifold. The oxygen sensor bank 2 on the 1996 BMW 328is is located in the head pipe.
On a 2001 BMW X5, Bank 1 Sensor 1 refers to the oxygen sensor located on the side of the engine that corresponds to cylinder bank 1, which is the side of the engine with cylinders 1, 2, and 3. In this vehicle, Bank 1 is typically the rear side of the engine, closest to the firewall. Sensor 1 specifically is positioned before the catalytic converter, monitoring the air-fuel mixture.
Bank 1 sensor 1 is upstream bank 1 sensor 2 is downstream
Bank 1 is the bank that sits closest to the front of the vehicle. Bank one is the bank with cylinder # 1. You have 4 oxygen sensors, (bank 1 sensor 1, bank 1 sensor 2, bank 2 sensor 1 and bank 2 sensor2). Follow the exhaust from the head of bank 1. The first sensor you come to is sensor 1, the second is sensor 2.
is located in the exhaust manifold .every time is to much better change the 2 sensor atone time
which sensor is for bank 1 sensor 1 on a 2006 nissan xterra
Bank 1 Sensor 1- driver's side exhaust pipe Bank 1 Sensor 2-right before catalytic converter Bank 1 Sensor 3- right after catalytic converter Bank 1 Sensor 1- passenger side exhaust pipe Bank 1 Sensor 1- driver's side exhaust pipe Bank 1 Sensor 2-right before catalytic converter Bank 1 Sensor 3- right after catalytic converter Bank 2 Sensor 1- passenger side exhaust pipe
bank 1 is always the head with the number 1 spark plug and the number 1 sensor is always in front of the converters closest to the motor
bank 1 sensor 1 2002 on toyots sienna
No, bank 1 sensor 1 can not be used in place of bank 1 sensor 2. There are generally completely different part numbers and need the exact one they are asking for.
Where are the Bank 1 Sensor 1 oxygen sensor on a 1998 ford explorer?
Bank 1 sensor 1 is screwed into the exhaust manifold on the back of the engine. Bank 1 sensor 2 is screwed into the catalytic converter.Bank 1 sensor 1 is screwed into the exhaust manifold on the back of the engine. Bank 1 sensor 2 is screwed into the catalytic converter.