The 1997 Plymouth Voyager low pressure valve is located on the bottom of the air conditioner compressor. The low pressure valve has a hose connected to it.
The 1998 Plymouth Grand Voyager low pressure port can be found on the top of the air conditioner compressor. The low pressure port should be labeled as such.
Under the dash on the driver side.
On a 2000 Plymouth Grand Voyager, the low-pressure AC port is typically located on the larger diameter hose that connects the AC compressor to the evaporator. This port is usually found near the front of the engine bay, close to the passenger side. Look for a service port with a blue or black cap, which is designed for refrigerant recharge and maintenance. Always ensure the engine is off and the system is not under pressure before attempting any work on the AC system.
Under the hood, along the driver side inner fender panel.
The 1997 Volvo 850 low pressure port is located on the air conditioning compressor. The low pressure port will be on the right hand side of the compressor.
You can find the low side on the a/c compressor or on the low side suction hose...........
The 1997 Ford F1 50 pickup truck low pressure recharge port is located on the air conditioner compressor. The low pressure recharge port will be labeled as such.
It is the larger of the two, closest to the front of the vehicle the smaller one is closer to the firewall or interior of the vehicle
The 1997 Honda Accord air conditioning low pressure port is located on the top of the air conditioner compressor. You can recharge your air conditioning systems through the low pressure port.
You can find the 1997 Mercury Cougar low pressure port on top of the air conditioner compressor. The low pressure port will have a blue top.
To recharge the freon in a 1997 Plymouth Breeze, first ensure the vehicle is turned off and locate the low-pressure service port, typically found near the AC compressor. Attach a refrigerant recharge kit to the port, ensuring the canister is upright, and start the engine with the AC set to maximum. Slowly open the valve on the refrigerant can until the system reaches the recommended pressure, then remove the canister and replace the cap on the service port. Always follow safety guidelines and check for leaks after recharging.
left side of