Usually on one of the valve covers attached to a rubber hose going to the emissions system. the valve covers are the "upside down bread pan" looking things on both sides of the engine.
On a 1986 Chevy 305 engine, the Positive Crankcase Ventilation (PCV) valve is typically located on the valve cover. It is usually found on the driver's side valve cover, fitting into a grommet. The valve connects to the intake manifold via a hose, allowing for the circulation of gases from the crankcase to the intake for combustion.
most generally it is located in the top of the valve cover on one side or the other. it will be attached to a 1/2 inch rubber hose normally.
The recommended spark plug gap on a 1996 Chevy C1500 with a V8-305 engine is .060"
The Chevy small block V8 305 cubic inch engine was manufactured between 1976 and 1996. It was used in cars and trucks.
Check on the carb.
8 degrees.
I have a 1996 305, Vortec with that number on it.
it depends if you have a 305 or 305ho , 305 8:1 compression cupped cylinders 305ho has 9:1 compression with valve cut pistons
17 ft/lbs.
For the 305 (LO3), the PCV valve is located on the driver's side valve cover. It's held in place with a rubber grommet.
It is behind the distributor at the firewall.
In the cylinder heads.