were is the egr value on 1996 z28
97 Z28 camero 5.7 egr vavle located on engine
It is on the back of the intake manifold.
Mounted on the rear of the intake manifold (difficult to get to!).
Either a 305 TBI, 305 TPI or a 5.7 TPI
NO!
The L98 5.7 TPI 1992 Camaro Z28 Completes 0-60 In 5.7 Seconds
The L98 5.7 TPI 1992 Camaro Z28 Completes 1/4 mile in 14.7 Seconds
On a 1994 Camaro Z28, the EGR (Exhaust Gas Recirculation) vacuum line can typically be found attached to the EGR valve, which is located on the intake manifold near the rear of the engine. The vacuum source for the EGR valve usually comes from the intake manifold itself, ensuring that it operates correctly under specific engine conditions. If you're troubleshooting or inspecting the EGR system, follow the vacuum line from the EGR valve back to the intake manifold for proper diagnosis.
it should be right off your intake manifold.
There is no crank sensor on a 1986 camaro z28.. that sensor is in the camaros past 1988 i believe.. but the 1986 carb or fuel injection (tpi) does not have one
in the tank take it to a garage you need to drop the rear diff