On a Bobcat 773, the hydraulic plug is typically located on the hydraulic reservoir or in the hydraulic system near the rear of the machine. It may be labeled, and you can usually find it on the left side of the machine, close to the hydraulic oil fill neck. Always refer to the owner's manual for specific locations and maintenance instructions.
in the fuse box =]
Hydraulic Reservoir 4.8 gal Hydraulic System 8.5 gal Chaincase Reservoir 9 gal
The Bobcat 773 typically requires a high-quality hydraulic fluid that meets the specification of ISO 46 or equivalent. It’s essential to use fluids that are designed for heavy-duty applications and can withstand high pressures and temperatures. Bobcat recommends using its own brand of hydraulic fluid or fluids that meet their specifications to ensure optimal performance and longevity of the hydraulic system. Always refer to the owner's manual for specific recommendations and requirements.
where is the drain plug for hydraulic fluid on 743 bobcat
the oil capacity for a bobcat 773 with oil filter is 7.5 quarts
The Bobcat 773 has a fuel capacity of 14 gallons (53 liters).
Bobcat 773 service manual
there is no hydraulic drain plug on a bobcat 763 you need to pull a line off the bottom of the tank like when you change the case drain filters
The fuse box on a 773 Bobcat is located on the floor board of the operator's compartment. There are two bolts that have to be removed to access the fuse box.
on the front of the machine, there is a plug (alan wrench style.) if it is leaking from the axle seal it is not hydraulic, it should be 80/90. add to the chain case through the plug on front.
15w40 rotella
All Bobcats use Bobcat Premium Hydraulic/Hydrostatic Fluid.