The 1998 Nissan Frontier pickup truck turn signal relay switch is located beneath the drivers side dashboard. The turn signal relay switch will be above the brake pedal.
The Nissan Frontier six-cylinder fuel pump relay switch can be found attached to the frame, near the fuel tank. The fuel pump relay switch will be on the right hand side of the vehicle.
2000 Nissan frontier wiper
no such relay.
In a 2001 Nissan Frontier, the fuel relay switch is typically located in the fuse box under the dashboard on the driver's side or in the engine compartment. To reset it, you can simply disconnect the battery for a few minutes, then reconnect it. Alternatively, you can locate the relay in the fuse box, remove it, and then reinstall it to reset the system. Always refer to the vehicle’s manual for specific details related to your model.
On a 2004 Nissan Frontier, the starter relay switch is typically located in the engine compartment fuse box. This fuse box is usually found near the battery, on the driver's side. You may need to consult the owner's manual for a specific diagram to identify the exact position of the starter relay within the fuse box.
Nissan Frontier Fuel Pump Relay LocationLocation varies with engine type and model. On 2000 Fronteir Desert Runner V6; Fuel pump relay was found under dash above E-brake. Fuel pump relay has 2 White with black stripe wires thar are 12 volt with ignition on, a white with blue stripe that sends 12Volts to the Fuel pump and a white with red stripe that is the relay control wire from the ECU. Good luck.
That 92 GMC van doesn't have a relay for ignition. Power for the ignition is supplied from the ignition switch.
The 1995 Nissan Pathfinder headlight relay switch is located on the firewall in the engine compartment. The headlamp relay switch will be on the drivers side of the firewall.
"http://wiki.answers.com
You can find the 1991 Nissan starter motor relay switch in the fuse box. The starter motor relay switch will be in the third column, second from the bottom.
The 1996 Nissan fuel pump relay switch is located on the firewall in the engine compartment. The relay switch will be on the drivers side of the firewall.