The low pressure AC port on a 1990 Oldsmobile 98 is located on the accumulator, which is typically mounted on the passenger side of the engine bay. Look for a cylindrical component with two hoses connected to it; the low pressure port will usually be the larger of the two fittings. It should have a cap that can be unscrewed to access the port for charging or servicing the AC system.
The low pressure port on a 1996 Oldsmobile Cutlass is between the compressor and the firewall. It is on the larger hose attached to the compressor.
Where is ac low pressure service port on a 1990 ford mustang
The low pressure port on a 1990 Ford van is in the rear of the engine compartment. It is on the passenger side, near the firewall.
The 2001 Oldsmobile intrigue air conditioning low pressure port is located on the top of the air conditioner compressor. There are two ports on the compressor. The low pressure for is on the left-hand side.
The 1990 Mazda 626 air conditioning low pressure port can be found on top of the air conditioning compressor. The low pressure port should be labeled.
The Oldsmobile Cutlass supreme refrigerant port can be found on the air conditioner compressor. The refrigerant port will be labeled as the low pressure port.
Low pressure port - Larger hose from air compressor
Low pressure port is located close to the A/C compressor on the inlet tubing. You need to access it from underneath the front bumper/engine area.
Depending on year it will be located on the accumulator near the firewall........
The AC low pressure recharge port on a 1997 Oldsmobile Aurora is located on the larger diameter aluminum line that runs from the compressor to the evaporator. You can find it near the front of the engine compartment, typically close to the driver’s side. It is important to ensure you are using the correct port for recharging the system to avoid any potential damage.
The 1987 Oldsmobile Delta 88 loci service port can be found on the top of the air conditioner compressor. The low side port will be labeled as such.
look for the port with the black cap on it, it's the low pressure port.