Seat belt cilker.
It is probably because the sensor under the seat for the seat belt has disconnected --Same thing happened to me. The light would go out when I pulled on the seatbelt. The reason was the simple fact that the belt was twisted before it came out of the shoulder "bracket". Oh... The sensor is in the door post, not under the seat. I also thought of that eventuality and checked. Nope, no sensor under the seat!
It sounds like it is working fine except in reverse, maybe reversing the wires will do the trick.
Go to an auto wrecker, the dealer charges you 300 bucks with labour per belt!
If there is weight on the seat, it senses that (probably a spring systme), and if the seat belt isn't in the buckle (there's a sensor there as well), the light flashes or it beeps.
put the seat belt on
by putting you're seat belt on?....
Yes you can.
To remove the seat belt from a 2000 Toyota Celica, first, locate the bolt securing the seat belt anchor to the car's body. Use a socket wrench to remove this bolt. Next, detach the seat belt from any clips or guides along the seat or pillar. Finally, pull the seat belt free from its routing path in the vehicle.
Disconnect electrical connector under driver seat that connects to seat belt device.
take it to the Toyota dealership and ask them to replace it
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
Because they dont have sensor in seat