There are two. Both are under the plastic housing on the driver side end of the cylinder head.
The engine thermostat, on a 2008 Chevy Impala 3.5 V6, is located on the lower front side of the engine. The thermostat will have a water hose going into the top of it.
In a 2008 Subaru Outback, the thermostat is located in the engine compartment, specifically on the engine's cylinder head, near the upper radiator hose. To access it, you'll typically need to remove the engine cover and possibly the intake manifold, depending on the specific engine configuration. It's advisable to consult the vehicle's service manual for detailed instructions and diagrams.
Where is number 2 cylinder located on the engine of my2008 Mitsubishi Eclipse
On a 2008 Kia Optima, the thermostat is typically located near the engine, specifically at the end of the upper radiator hose where it connects to the engine. To access it, you may need to remove the hose and the thermostat housing, which is usually secured with bolts. Always ensure the engine is cool before attempting to locate or replace the thermostat.
Changing a thermostat on a 2008 Dodge Avenger can be difficult because there area two thermostats. One is located under the intake manifold inside a housing unit, and the second is at the end of the radiator hose.
for a 4 cylinder , its located under the intake manifold.
2003-2008 located in the dash cluster by your speedometer. 2009 On the information cluster above the radio.
In a 2008 Toyota Tundra with a 5.7-liter V8 engine, the number one cylinder is located at the front of the engine on the driver's side. This configuration follows the typical firing order for V8 engines, where the cylinders are numbered from the front to the back. Thus, the number one cylinder is the first cylinder closest to the radiator.
It is the passenger side cylinder on the front head.It is the passenger side cylinder on the front head.
The temperature sensor on a 2008 Dodge Avenger is typically located near the thermostat housing, which is situated on the engine block. It is often found on the cylinder head or near the intake manifold, depending on the specific engine configuration. For accurate identification, consult the vehicle's service manual or a repair guide for detailed diagrams.
There are actually two thermostats. They are in and under the large black plastic housing bolted to the driver side end of the cylinder head.There are actually two thermostats. They are in and under the large black plastic housing bolted to the driver side end of the cylinder head.