Either your switch is jammed, or there's a short to ground somewhere in the circuit which is allowing the circuit to remain closed.
flash memory
The Fiero has two flashers from the factory, the signal light flasher and the emergency or four way flasher. These are identical GM style two prong flashers. There are many quality levels and even a few novelty flashers available.
It is normal for the emergency flashers to work with key on or off. You need to shut the e-flashers off with the e-flasher switch.
Turn signal bulbs and hazard bulbs are the same bulb. When the turn signal is turned on, the indicator light on the dash flashes in tune with the turn signal. When the hazard lights are turned on, an extra fuse which is live, powers the hazard flashers, even if the car is turned off.
Yes, some appliances continue to draw a small amount of power even when they are turned off. This is known as standby power or vampire power.
A dripping faucet after the water has been turned off is usually caused by a worn-out or damaged washer or seal in the faucet. This allows water to continue leaking through even when the faucet is closed.
A dripping faucet when turned off is usually caused by a worn-out or faulty washer or seal inside the faucet. This allows water to continue flowing even when the faucet is closed.
the receiver for the belt has a sensor. if it fails the light will continue to flash even though the belt is buckled. replace it!
Flash drives primarily use NAND flash memory as their storage component. This type of non-volatile memory retains data even when power is turned off, making it ideal for portable storage. Additionally, flash drives contain a USB interface controller that manages data transfer between the flash memory and the host device.
The shower is turned off but the water is still running because there may be a leak in the faucet or showerhead, causing water to continue flowing even when the shower is not in use.
There may be a problem with the thermostat or heating element in your electric oven, causing it to continue heating even when turned off. It is recommended to have a professional technician inspect and repair the issue to ensure safe operation of the appliance.
The furnace fan may keep running even when the thermostat is turned off due to a malfunction in the fan relay or a problem with the thermostat wiring. This can cause the fan to continue running independently of the thermostat setting.